LM 320 HT-Grease MoS2
(LM 320 MoS2 HT Grease)
DESCRIPTION LM 320 MoS2 HT Grease is based on inorganic gels with MoS2 of consistency grade 2. This product is particularly adherent, resistant to water and oxidation and stable to liquifying. The product has a high load-carrying capacity and guarantees reliable corrosion protection.-
PROPERTIES - high load-carrying capacity
- stable to ageing
- protects against corrosion
- particularly adherent
- resistant to water and oxidation
Complies with the certification for grease in accordance with DIN 51502
KPF2N-15
TECHNICAL
DATA Colour : black
Basis : mineral oil
Thickener : bentonite
Base oil viscosity +40 °C : 470 mm2/s
Drop point : none
NLGI number : 2
Operating temperature range : -15 °C to +150 °C
short term +200 °C
Unworked penetration 1/10 mm : approx. 270 DIN 51 801
Worked penetration : 300-340 DIN 51 804
Penetration gradient after 10,000 DT 1/10 mm: less than 30
after 100,000 DT 1/10 mm : less than 40
Penetration gradient after 4-hour
Shell Roll Test 1/10 mm : less than 40
Water resistance at 90 C : 1 DIN 51 807
EMCOR test : 0 ( no corrosion) DIN 51 802
Corrosion effect on copper 100 h/+100°C : 2 DIN 51 811
Resistance to oxidation during a pressure drop
after 100 h/+100 °C : less than 0.5 bar DIN 51 808
Four-ball test : 3200 N welding load DIN 51 350
APPLICATION Used for lubricating roller and plain bearings, especially at high temperatures.
INSTRUCTIONS As usual for greases; do not mix with other greases.
AVAILABLE
PACK SIZE LM 320 MoS2 HT Grease 400 g Part no. 4030
5 kg Part no. 404 |
